| |
|
|
|
| |
|
|
|
 |
ISO
9001 Certification
 |
 |
ASME Section VIII
 |
| |
The
TÜV Certification Body of TÜV Management Service GmbH certifies
in accordance with TÜV CERT procedures that LaMOT
has established and applies a quality system for Design and Manufacture
of Rupture Discs, Rupture Disc Holders and Accessories. |
|
The
ASME Code, Section VIII, Division 1, became effective on July 1, 1998.
With this updated code, it is required that the rupture disc device
have the
Code Symbol Stamp, a certified flow resistance factor, and the minimum
net flow area stamped on the rupture disc tag. |
| |
|
|
|
| |
Other
National and International Standards
 |
| |
LAMOT can manufacture product in accordance to many
other national and international standards including BSI,JIS, and
DIN. To inquire about other standards, please contact LAMOT directly or your local Representative.
|
| |
 |
|
 |
| |
CE
Certificates - The European
Pressure Equipment Directive
 |
|
ATEX
Rupture Disc Device
Certificate of Assessment
 |
| |
The Pressure
Equipment Directive (PED)
is intended to assure that applicable pressure
equipment meets the "essential safety requirements"
established by the European Union.
|
|
Rupture disc devices are compliant with the applicable
ATEX essential safety requirements based on an ignition risk assessment
for NON-ELECTRICAL equipment performed per EN 13463 part 1 and Notified
Body review and retention of the product technical file. |